chillgun25

Door Handle Replacement Door handles seem like an insignificant thing, but if you dislike the style or design of them, or are finding them difficult to use, it's worth replacing them. With a bit of patience, you can put in an entirely new handle in a short time. Modern door handles are often equipped with cover plates that conceal the screws, giving them an attractive appearance. However, you'll have to attach them separately if the new handle does not have them attached already. Removal of the old Handle The door handle isn't only a decoration for your home it also serves as a safety feature that allows you to lock and unlock the door. But, over time, your door handle may lose its grip, become loose, or appear old and worn out. This is a sign that it's probably time to replace it. If your door handle is becoming difficult to use, it could be time to replace it. This is a problem since it means that you are unable to not lock or unlock your door which could pose the risk of security for you and your family. Another reason to replace your door handle is when it's damaged or broken. A broken door handle can be quite dangerous, especially in the event that your children or senior family members have difficulty opening it, and get trapped within. It's easy to replace a broken handle on the door. Modern door handles are usually standard sizes and should fit any door. If you are not sure if the new door handle you are buying will work, take out the old one and measure its housing holes. This will help you to buy the right door handle. It is easiest to remove the old door handle by unscrewing it from the door. Usually it is a matter of using a screwdriver. However certain door handles come with a cover plate that conceals the screws that mount them, so you'll have to cut off this cover plate to get access to the screws beneath. Once you have removed the old handle, make an outline of how the spindle is positioned to ensure you are able to make sure it is aligned when you put in your new one. You can also remove the door handle by unscrewing the latch mechanism. This is typically done with the screwdriver, but you'll need to locate the small latch, which should be at the edge of the trim piece. Once you've removed the latch, you'll need to unscrew the handle from the strike plate, and then remove the latch away from the door's edge. Removal of the Strike Plate If you are replacing the handle, you'll need to replace the latch plate, which holds the hole that the door's latch hooks into when it closes. The packaging that the new handles arrive in will have two options for latch plates – either a rectangular or circular (see the diagram above for the parts of the door handle). If you have a rectangular latch plate, replace it with an oval one. This will allow the latch to hook into the strike plate, making the handle more convenient. The first step is to remove the screw that holds the latch plate that was previously in place. The screws are often quite tight and require a fair amount of force to loosen them. It is helpful to have a second person help with this task if you can. After the screws are removed the latch should slide out of the door easily. If it's stuck or won't move then use a small nail file to scrape the edges of the latch plate. This may help free the plate. Now you can prepare the new strike plate for installation. Using the screws made of wood that came with your new handles, screw the latch plate to the inside of the doorjamb. Do not tighten the screws too much as this could damage the strike plate. If you're not sure whether the latch plate is in the proper position Try closing and opening the door to check whether it latches and closes correctly. If it doesn't then you'll need to adjust the strikeplate up or down or forward or back until the door shuts correctly. If the door still moves or jiggles, then you may have to expand your latch hole on the strike plate. This is more frequent for older doors, but could also be caused by wear and tear hinge mortises that are too narrow or not the right size for the latch, or from a broken or damaged strike plate that is damaged or broken. If this is the situation, use a metal filing instead of a chisel, or hammer to adjust the strike plate. Take off the Latch The latch is a bent metal piece that slides into and out of a hole on the inside of your door. The latch moves forward when you turn the handle. It also connects to an opening in the door frame to keep the door shut. If your door wobbles when you close, a new latch may be the only thing needed to fix the problem. It's difficult to see the screws that hold the latch to the door, however there's usually a small slot on the trim plate that lets you to insert a screwdriver in order to take it off. After you've removed the trim plate, it will be simple to remove the latch and the bolts that keep the latch and spindle in place. If the latch won't release it is suggested to use an old-fashioned paper clip or tool to free it from the handle mechanism. Insert the item into the slot for the latch that is recessed. gently move it around until you feel the handle and latch begin to split. repairmywindowsanddoors is possible to repeat this process several times before you can remove the latch. After the old latch has been removed it should be possible to slide the new latch into the slot without difficulties. Make sure that the latch is properly positioned in the slot and lined up with the screw chambers and then use your new screws to fasten it to the strike plate and door frame. Check the backset of the current handle (the distance between the center of the large hole on the front of the door and the edge) prior to installing the new handle. Also, ensure that the size of the latch on the new handle is a good match to the measurement of your existing handle. If you're replacing the handle or latch or handle, or if the old lock cylinder is damaged, then you'll need a new one. If you're not switching locks the new lock will fit in the recess you have already installed, and work with your existing keys. Be sure to select the latch with rectangular cover plates that match the handles you have. Remove the cover plate You can replace your door handles with a modern rose and lever designs to enhance the appearance of your house. You can buy complete sets that include escutcheons, privacy adaptors and escutcheons. To replace an internal door handle, remove the cover plate (or rose) that protects the screws and the inner mechanism. Find an release tab on the plate, and employ a flathead screwdriver remove it from the knob. It may have a slot on one edge or be secured by a pin. When the cover plate is removed, remove the screw that holds the interior handle in place, and then set it aside. Remove the screws that hold both the inner and outer plates. You can loosen them by using the help of a Philips Screwdriver. Then, you can remove the outer plates and latch plate from the door and put them aside. Most doors have an opening between the jamb of the door and the edge of the frame that allows for a handle, but not all do. If yours does not have a handle, you'll need to drill a new hole in the door. The process for doing this is similar to the procedure for opening a door with locks, but you'll have to be extra careful not to harm the frame or door. After the holes are drilled, you'll need to install new screws for the door knob. Be sure to purchase the same size as the old ones, so you don't end up with the handle that is too tight or loose. Installing a new latch and strike rod is also mandatory. They aren't included in most door handle sets. Amazon's Choice FAERSI 2-piece chrome finish handle sets are a great choice if you're in the market of a premium interior door handle replacement set. It's a factory fit and has received a plethora of five-star reviews from delighted customers. It's a great choice to replace damaged or worn door handle hardware in the interior of your Chevy HHR.